These special lights generate a dark field over a larger measuring area thanks to their special reflector.
In contrast, the measuring area of commercially available dark field lights is often only very narrow.
The planistar light hood was originally developed specifically for the surface inspection of wafers.
If you cannot find a suitable light in our extensive standard range, we will be happy to offer you LED lighting according to your requirements.
The targeted oblique incidence of light helps to show edges, scratches, embossing, indentations and elevations more clearly. The optical features in the surface appear much brighter compared to plain surfaces and are easier to identify thanks to our dark field illumination.
The special feature of this module is that this lighting has been developed for continuous operation as well as for flash mode. This allows it to be set up in continuous mode and later operated in flash mode. The switching inputs respond to every rising edge from 5 V TTL to 24 V PLC.
No other external controllers are required, everything is built into the light.
Our light hood was originally developed by planistar specifically for inspecting solar wafers. It is characterized by very uniform illumination on the measuring surface. The technology is now used wherever shiny surfaces need to be inspected.
The special feature of this module is that the hood has been developed for continuous operation as well as for flash mode. This allows it to be set up for continuous operation and later operated in flash mode. The switching inputs react from 5 V TTL up to 24 V PLC to every rising edge.
No other external controllers are required, everything is built into the light.
Genau hier liegt unsere Stärke. Durch dem planistar die Leuchten im eigenen Hause fertigt, können wir kundenspezifische Hintergrundbeleuchtungen in kurzen Lieferzeiten herstellen.
So müssen Sie sich nicht nach unserem Standardprogramm richten. Wir richtigen uns genau nach Ihren Anforderungen und den Gegebenheiten vor Ort.
So sparen Sie Kosten in derUnsere Fertigungsabläufe sind so geplant, dass eine kundenspezifische Leuchte nahezu den gleichen Durchlauf hat wie eine Standardbeleuchtung. Der einzige Unterschied ist, dass die Sonderleuchte genau Dokumentiert wird. So sind wir auch noch nach Jahren in der Lage, Ersatz zu liefern.
Profitieren Sie von der Zusammenarbeit mit planistar.
Leuchten direkt vom Hersteller
When revising the product series, we always take sustainability into account, as many small details add up to a big picture.
This starts with saving resources and energy, the right choice of materials we use, right through to packaging and disposal.
In our lamps, the LED controllers are always built-in to the lamp. This prevents operating errors and accidental damage.
In order to achieve optimum interaction between the LED and the control unit, the electronics are also developed in-house and manufactured exclusively for us by a regional company.
The installation of the controller in the light offers a decisive advantage, especially for applications with flash operation. The very high and short flash current is generated and stored in the luminaire. The currents in the supply line can thus be reduced accordingly. This principle helps to reduce the risk of EMC interference.
The internal microcontroller monitors the pulse-pause ratio and only allows a new pulse after 1:5. This prevents the LEDs from overheating and being damaged by the flash mode.
In flash mode, the pulse duration is limited to a maximum of 1.5 ms. Longer trigger times are referred to as switching mode.
Our devices reach 80% of their brightness 80µs after the input signal has been applied. The brightness is not the same as the voltage at the LED.
The days when LEDs did not generate any heat are long gone. Due to increasingly powerful technology, it is important to design optimum thermal management for the entire fitting.
Because the only death for an LED is heat death. For this reason, the heat at the LEDs determines the service life of the entire luminaire.
Our mostly 2 mm aluminum housings serve as a large cooling surface which, depending on the application, can be supported by additional heat sinks.
Our team will be at your disposal for any questions you may have. We will process your request as soon as possible.
+49 (0) 9364 8060-0 | sales@no-spam.planistar.de | Catalog incl. prices | |||||||
|