- LED Lighting systems for industrial image processing
- Lighting for visual inspection
- Machine lighting
- Light boxes for graphics and photographs
- About planistar
planistar manufactures two different types of line lights: one for pure continuous operation and the other, very bright LED line light for continuous and flash mode. They are offered in various standard lengths. As a result, you have a wide choice for your applications in industrial image processing.
Whether for continuous operation or for flash mode, there is something for every application of your image processing task in our large selection of LED line lightings.
The LED line lighting can achieve a brightness of up to 2.4 million lx, depending on the assembly, and are mostly used in conjunction with line scan cameras.
With the bright Xled variant, a fast response time of 12 µs is possible in flash mode (here the actual light was measured, not the signals). Flash times from 40 µs to 1500 µs are possible. The built-in microprocessor monitors the input signal and thus actively checks the maximum pulse/pause ratio of 1:5. This allows up to 5 kHz to be realised, and overloading is excluded.
The directed LED line lighting has a beam angle of approx. 2–3° in the transverse direction. There is no focusing in the longitudinal direction, so a much more homogeneous light is generated on the measuring surface. A special film can be used for glossy test surfaces to avoid reflections of the LEDs in the test object.
|Order code||Illuminated line length||Brightness||Price||Data sheet||Drawing|
|(light colour white)||mm||lx at distance||€ / piece||.step|
|For continuous and switching operation with integrated optocoupler switch input and status indicator:|
|11-Sled-3-BZ-19w-O||110||160.000 lx at 5 cm||374,00||STEP|
|43-Sled-3-BZ-19w-O||430||190.000 lx at 5 cm||604,00||STEP|
|87-Sled-3-BZ-19w-O||870||190.000 lx at 5 cm||775,00||STEP|
|147-Sled-3-BZ-19w-O||1470||200.000 lx at 5 cm||1208,00||STEP|
|For continuous and flash mode with switch inputs and interface:|
|20-Xled-3-BZ-46w||200||850.000 / 2,4 Mio. lx at 5 cm||633,00||STEP|
|40-Xled-3-BZ-46w||400||850.000 / 2,4 Mio. lx at 5 cm||955,00||STEP|
|80-Xled-3-BZ-46-w||800||850.000 / 2,4 Mio. lx at 5 cm||1702,00||STEP|
|140-Xled-3-BZ-46-w||1400||850.000 / 2,4 Mio. lx at 5 cm||2645,00||STEP|
|Possible light colours||for Sled-3: -19w (white), -20r (red), -21b (blue), -22g (green), -23a (amber), 27rgbw (red, green, blue, white)|
|for Xled-3: -46w (white), -47r (red)|
All prices plus VAT + freight and packaging.
The controllers are already integrated (PMW with 20 kHz or DC control), so you do not need an external control unit, which would cause additional costs and possible operating errors. We provide switch inputs and interfaces for the connection to your image processing unit. This allows the line light to be used flexibly.
Our power line lights all originate from our in-house development facility. Our lightings stand out from other manufacturers. What is more, we have improved the following features:
planistar offers a coordinated system for your application with line scan cameras – high-quality, sustainable and individual.
Many manufacturers of line lights use an LED matrix of narrow-beam LEDs. planistar, on the other hand, uses a rod lens to focus only in the transverse direction. In the longitudinal direction, we still have a diffuse emission of about 120°. This is how you get a more even light distribution with our line illumination.
Our LED line lightings have a very narrow beam angle of only about 2–3°. This means that no defined working distance is prescribed. Our customers can choose the distance flexibly. TIP: Here it is important to always select the smallest possible working distance between the line illumination and the test object in order to achieve high brightness.
With planistar line lightings, the heat is evenly distributed by means of a 2 mm aluminium housing. The housings are hardly warm to the touch, so we achieve a particularly long service life with a low light fall-off. With our high-performance Xled units, the heat is also dissipated via a heat sink.
„No active cooling required.“
The housings of the LED line lighting from planistar are manufactured in our in-house sheet metal processing facility and not using milled parts or prefabricated profiles. We enjoy freedom of design as regards length and dimensions. There are mounting options on the side edges as well as on the back. The robust housings can be manufactured up to a length of approx. 1.8 m in one piece; for greater lengths, edgeless modules are manufactured for adding on.
With all our lightings, including the line lights, the currents are not regulated centrally but by segment. In this way, the currents between the LED strands are distributed more evenly and also loaded uniformly over the entire service life. To produce flashes, the required power is stored in capacitors in the LED strip luminaire. As a result, the current is available quickly.
Another advantage is the improved susceptibility to EMC interference. The input currents are considerably reduced by the internal storage when flashing and distributed to the individual segments in the strip lighting. There are therefore no massive peak currents at any time in the lighting unit and in the supply line. This avoids interference pulses in the assembly of the industrial image processing system.
We will be happy to advise you on which design and length will achieve the ideal results for your application. Do you have any questions? Simply contact our team by email or telephone.
More information and points of contact:
|+49 (0) 9364 firstname.lastname@example.org||Complete catalogue|
We develop tailor-made solutions for you. Fast, inexpensive and individual.